07-15-2018, 06:14 PM
... so printed this guy:
![[Image: attachment.php?aid=822]](https://www.3dprinteddroids.net/attachment.php?aid=822)
190% scale (maxed out print area), so just under 12 inches tall.
0% infill (hollow) at .25 layer height (using a .5 hardened steel nozzle).
Took about 35 hours to print. This pic is after support has been removed.
Now I want to see how well he takes a stain, to darken him up a bit.
190% scale (maxed out print area), so just under 12 inches tall.
0% infill (hollow) at .25 layer height (using a .5 hardened steel nozzle).
Took about 35 hours to print. This pic is after support has been removed.
Now I want to see how well he takes a stain, to darken him up a bit.