Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

» Members: 786
» Latest member: jfnonton-com
» Forum threads: 594
» Forum posts: 3,157

Full Statistics

The Back Door
Some pictures of the back door. This confused me for a bit!

The finished look from the outsice (or back)
[Image: attachment.php?aid=324]

The small stem is bolted to the back pannels
[Image: attachment.php?aid=325]

This is what the stem looks like form the other side. You will need to assemble like this. Its a clever design that helps you hold the curved shape, something I was worried about. 
[Image: attachment.php?aid=326]

I used a soldering iron to help melt the nuts into the plastic. I just held the iron against the metal and slowly pulled on the bolt until it sunk into the body of the print :o)
[Image: attachment.php?aid=327]

The pitch fork like contraption then fits into the roof of the space as shown below. I just glued this part into place. 
[Image: attachment.php?aid=328]

You can see a better view here...
[Image: attachment.php?aid=329]

And then once the back is on...
[Image: attachment.php?aid=330]
Last step was to put the back plate on. 
Job done Smile 
Lots of sanding to go now Sad  

[Image: attachment.php?aid=332]

Attached Files Thumbnail(s)

Forum Jump:

Users browsing this thread: 1 Guest(s)