3D Printed Droids
R2D2 painting - Printable Version

+- 3D Printed Droids (https://www.3dprinteddroids.net)
+-- Forum: Welcome (https://www.3dprinteddroids.net/forum-11.html)
+--- Forum: Build Logs (https://www.3dprinteddroids.net/forum-34.html)
+---- Forum: R2-D2 (https://www.3dprinteddroids.net/forum-35.html)
+----- Forum: kylecampbell (https://www.3dprinteddroids.net/forum-73.html)
+----- Thread: R2D2 painting (/thread-589.html)



R2D2 painting - kylecampbell - 03-12-2019

Sanding, Painting and prep-work coming along very slowly.  Just waiting for better weather so I can paint outside more. 

[Image: IMG_9746.JPG]

[Image: IMG_9736%2B%25282%2529.JPG]

[Image: IMG_9735%2B%25282%2529.JPG]

[Image: IMG_9742.JPG]

[Image: IMG_9741.JPG]

[Image: IMG_9744.JPG]

[Image: IMG_9739.JPG]

[Image: IMG_9738.JPG]

[Image: IMG_9701.JPG]

And here, showing the mods to the lower dome ring.   I took it all apart and and stretched it out so the lasy susan was loose within the ring.  No more jamming of the dome.  I filled the gaps using my 3D pen. [see below]
[Image: IMG_9696.JPG]

Dome work and "Welding" of the dome parts togeather. 
[Image: IMG_9689.JPG]

Finally got the undercoat on the dome and then its black silk coat. I can now see lots of blemishes and joins in the dome so its back to sanding and prepping parts again. Oh well.
[Image: IMG_9755.JPG]

[Image: IMG_9761.JPG]

[Image: IMG_9759.JPG]

Once I am happy with this coat [hopefully at some point!], then its a silver coat and the final top coat in a shade of red, I think. 

Here's Dobby keeping an eye on it all. 
[Image: IMG_9760.JPG]

And the door panels are now prepped and painted and getting sanded down. 

[Image: IMG_9751.JPG]

I have decided to reprint most of the rear door sections as first attempts were really warped.
[Image: IMG_9750.JPG]

I have sanded and filled and sanded and undercoated the legs/feet so might now try black and then silver coats on these. 
[Image: IMG_9757.JPG]


RE: R2D2 painting - Cyber_One - 03-12-2019

Nice Work.